ConTech Safety and Training Ltd.
  • Home
  • Programs
  • About
  • Clients
  • Contact

Programs.​

We provide a wide variety of training programs that are current, learner focused, competency based and fun.  
Back to All Programs

Cranes, Hoists and Lifting Devices - Articulating Cranes

Course Length: 8 Hour Program
Pricing:
Contact 
Content:
Based on 40% Lecture, 40% Workshop, 20% Evaluation
  • Locate, Review, and Comprehend the applicable sections of the Alberta Occupational Health and Safety Act, Regulation and Code (2009) including definitions used in rigging
  • Identify and Inspect all basic components on your crane as per manufacture pre-operational procedures.
  • Be able to Operate your crane as per manufacture and company procedures in a safe and competent manner at all times.
  • Assess the hazards associated with a rigging job and determine the appropriate controls(Part 2) (Part 7)
  • Determine the weight of a load using six different methods including calculations (Part 6)
  • Determine when and how to complete a “serious lift” plan
  • Establish the tension on each sling leg
  • Comprehend the effect of sling angle on the load
  • Determine the centre of balance of the load
  • Verify the safe work load capacity for rigging equipment (Part 6)
  • Select the proper rigging equipment using the appropriate hitch and components (Part 6)(Part 21)
  • Inspect the rigging equipment and compare it to the inspection and rejection criteria in (Part 21) of the code
  • Communicate using industry accepted hand signals. Section 71, Section 191

Home

Programs

About

Clients

CONTACT

Copyright ConTech Safety and Training Ltd. © 2018
  • Home
  • Programs
  • About
  • Clients
  • Contact